ORTHOPEDIC INSOLES

Orthopedic leather insoles with transverse and longitudinal arch support in a light anatomical shape. ADAM offers a whole surface padding and a deep stabilizing heel cup.

2/3 orthopedic insole for flat and bow feet with a heel spurs cushioning

DIAS is an orthopaedic insole with a high arch support.

Orthopaedic 2/3 insole EVA antishock insoles

Kožené vložky antishockové na podélně plochá chodidla. Vnitřní skelet stabilizuje chodidlo ve fusbetovém lůžku a je tak ve správném postavení. Pevná hovězinová kůže.

Ladies leather insoles with a softer profile in the area of a metatarsal arch

Universal orthopedic 2/3 insoles

2/3 orthopaedic insole with perfect anatomical shape.

The comfortable padding and the integrated pad support the midfoot, relieve pressure when walking and standing and stop the foot from slipping forward in high heeled shoes. The toe cut-out leaves more room in pointed shoes and is therefore also ideal for open shoes. The leather binds moisture in the shoe and reduces foot burn.

FLEXI WOOL THERMO insole with transverse and longitudinal arch support is suitable for classic, boots and sporty women's and men's winter shoes. It balances the flat foot, insulates the footwear and absorbs shocks, especially in the heel area. The heel area is padded with Air-gel shock absorbents with the highest damping parameters. The insoles are made as a double size, e.g. 41-42, and for the smaller size /41/ it must be shorten by 5 mm at the tip with sharp scissors. The rear part of the insole is reinforced with a carbon part that makes it more abrasion resistant and increases durability.

Anatomical insoles for the forepart area in the shoe with a slight elevation in the metatarsal area.

The anatomical shape of the insoles is profiled on the underside by a flexible plastic skeleton that maintains the necessary height of the longitudinal arch. The transverse arch of the foot is supported by a latex metatarsal pad. The heel area is cushioned with Air-Gel shock absorbents with the highest damping parameters. The terry cloth finish absorbs perspiration well. The insoles are made as double sizes, e.g. 41-42, and must be shortened by 5 mm at the toe with sharp scissors for the smaller size /41/. The insoles are suitable for running shoes for foot cushioning and arch support. The fraying of the textile material at the edges is typical for the material.

Insole for the forepart area in the shoe with a slight elevation in the metatarsal zone.